HTML

PERFORATION, EMBOSSING, CUTTING, COATING

PEC²TEC-PRODUKTE

Die PEC²TEC Corporation ist bestrebt, durch unser Streben nach Exzellenz in den Bereichen Perforation, Prägung, Schnitt und Beschichtung ein Höchstmaß an Qualität und Kundenzufriedenheit zu liefern.

Produkte

Unser Produktionsportfolio ist immer an die Kundenbedürfnisse anpassbar

...fertiger Umbau - aus einer Hand!


Adhesive Coating
	Min	Max
Coil width	500mm	1500mm
Material Thickness	0.05mm	0.5mm
Coil Length	200m	2000m
Core sizes - paper	6"		6"
Adhesive Coating Tolerance (Powder only)	(+/- 5g/m²)
Adhesive Type
PT-20 PUR resin, Thermoplast	10g/m²	60g/m²
PT-30 Composite PU/Phenolic (<0.3%) Blend, Thermoset	10g/m²	50g/m²
PT-40 Epoxy-polyester composite, Thermoplast	10g/m²	35g/m²
PT-55 Mod. Polypropylen powder, Thermoplast	10g/m²	50g/m²
PT-70 Thermoplastic film based on mod polypropylenes	40g/m²	40g/m²


Sheeting / Blanking
	Min	Max
Sheet width	100mm	1400mm
Sheet length	100mm	3m+
Material Thickness - Aluminum	0.08mm	0.5mm
Material Thickness - Stainless Steel	0.05mm	0.2mm

Sheet Tolerance - Width	+/- 3mm
Sheet Tolerance - Length	+/- 5mm

Notes:
Aluminum with thickness of 0.08-0.1mm must be embossed to sheet			Aluminum with thickness of 0.08-0.1mm must be embossed to sheet	Aluminum with thickness of 0.08-0.1mm must be embossed to sheet
Stainless steel with thickness of 0.2mm can be cut to length but not slit


Perforation and Embossing
	Min	Max
Coil Width	150mm	1400mm
Material Thickness	0.05mm	0.5mm
Coil Length	100m	500m(w/emb), 1000m(wo/emb)
Perforation - C24(155ppi)	0.2mm	0.4mm (200 micron max)
Perforation - C5(32ppi)	0.3mm	1mm
Embossment - Small Ball	0.8mm	1.5mm
Embossment - Big Ball	1.0mm	3.5mm
Core sizes - paper	3", 6", 20"

Notes:
Embossing is required for 0.05mm to rewind			Embossing is required for 0.05mm to rewind	Embossing is required for 0.05mm to rewind
Coil length for 0.05mm can not exceed 300m			Coil length for 0.05mm can not exceed 300m	Coil length for 0.05mm can not exceed 300m

Embossment Type	Big ball and Small ball options		Big ball and Small ball options
Embossment Tolerance	small ball(+/- 0.1mm) - big ball(+/- 0.2mm)		small ball(+/- 0.1mm) - big ball(+/- 0.2mm)
Perforation Type	C24(155ppi) and C5(32ppi)		C24(155ppi) and C5(32ppi)
Perforation Tolerance	+/- 0.1mm


Slitting
	Min	Max
Coil Width	150mm	1400mm
Material Thickness	0.05mm	0.5mm
Coil Length	100m	500mm(w/emb), 1000mm(wo/emb)
Slit width	100mm	1300mm
Core sizes - paper	3", 6", 20"

Notes:
Embossing is required for 0.05mm to slit			Embossing is required for 0.05mm to slit	Embossing is required for 0.05mm to slit
Coil length for 0.05mm can not exceed 300m			Coil length for 0.05mm can not exceed 300m	Coil length for 0.05mm can not exceed 300m

Slitting Tolerance - Width	+/- 2mm


2D Die Cut - Clam Shell
	Min	Max
Part cutting area - Width	100mm	1000mm
Part cutting area - Length	100mm	700mm
Material Thickness	0.08mm	0.5mm

Machine bed size	1065mm X 765mm		0.2mm


3D Forming
50 ton press
Press Bed Dimensions	1500mm X 650mm
Press Bed open height	680mm

75 ton press		2006.6mm X 1295.4mm
Press Bed Dimensions	2006.6mm X 1295.4mm
Press Bed open height	927mm	927mm

Produkte

Unser Produktionsportfolio ist immer an die Kundenbedürfnisse anpassbar

...fertiger Umbau - aus einer Hand!

PRODUKTE

GESELLSCHAFT

META