PECTEC - Perforation, Embossing, Cutting
HTML
PERFORATION, EMBOSSING, CUTTING, COATING
PECTEC PRODUCTS
PECTEC Corporation is dedicated to delivering the highest level of quality and customer satisfaction through our pursuit of excellence in perforation, embossing, cutting and coating.
ReproducirPlay

Productos

Nuestra cartera de producción es siempre ajustable en función de las necesidades del cliente

...conversión completada - ¡fuente única!

Adhesive Coating
MinMax
Coil width500mm1500mm
Material Thickness0.05mm0.5mm
Coil Length200m2000m
Core sizes - paper6"
Adhesive Coating Tolerance (Powder only)(+/- 5g/m²)
Adhesive Type
PT-20 PUR resin, Thermoplast10g/m²60g/m²
PT-30 Composite PU/Phenolic (<0.3%) Blend, Thermoset10g/m²50g/m²
PT-40 Epoxy-polyester composite, Thermoplast10g/m²35g/m²
PT-55 Mod. Polypropylen powder, Thermoplast10g/m²50g/m²
PT-70 Thermoplastic film based on mod polypropylenes40g/m²40g/m²
Sheeting / Blanking
MinMax
Sheet width100mm1400mm
Sheet length100mm3m+
Material Thickness - Aluminum0.08mm0.5mm
Material Thickness - Stainless Steel0.05mm0.2mm
Sheet Tolerance - Width+/- 3mm
Sheet Tolerance - Length+/- 5mm
Notes:
Aluminum with thickness of 0.08-0.1mm must be embossed to sheet
Stainless steel with thickness of 0.2mm can be cut to length but not slit
Perforation and Embossing
MinMax
Coil Width150mm1400mm
Material Thickness0.05mm0.5mm
Coil Length100m500m(w/emb), 1000m(wo/emb)
Perforation - C24(155ppi)0.2mm0.4mm (200 micron max)
Perforation - C5(32ppi)0.3mm1mm
Embossment - Small Ball0.8mm1.5mm
Embossment - Big Ball 1.0mm3.5mm
Core sizes - paper3", 6", 20"
Notes:
Embossing is required for 0.05mm to rewind
Coil length for 0.05mm can not exceed 300m
Embossment TypeBig ball and Small ball options
Embossment Tolerancesmall ball(+/- 0.1mm) - big ball(+/- 0.2mm)
Perforation TypeC24(155ppi) and C5(32ppi)
Perforation Tolerance+/- 0.1mm
Slitting
MinMax
Coil Width150mm1400mm
Material Thickness0.05mm0.5mm
Coil Length100m500mm(w/emb), 1000mm(wo/emb)
Slit width100mm1300mm
Core sizes - paper3", 6", 20"
Notes:
Embossing is required for 0.05mm to slit
Coil length for 0.05mm can not exceed 300m
Slitting Tolerance - Width+/- 2mm
2D Die Cut - Clam Shell
MinMax
Part cutting area - Width100mm1000mm
Part cutting area - Length100mm700mm
Material Thickness0.08mm0.5mm
Machine bed size1065mm X 765mm
3D Forming
50 ton press
Press Bed Dimensions1500mm X 650mm
Press Bed open height680mm
75 ton press
Press Bed Dimensions2006.6mm X 1295.4mm
Press Bed open height927mm
PECTEC - Perforation, Embossing, Cutting
Fundada en 2014, PECTEC Corporation es una empresa experimentada e innovadora que atiende a los mercados estadounidenses con láminas de metal y productos metálicos de alta calidad microperforados y en relieve.
EQUIPO PECTEC
EXPOCONTACTO
151 Corporate Drive, Suites A - G
Spartanburg, SC 29303, USA
info@pectec.com+1-864-208-8090
© Copyright 2017 - 2022 - PECTEC - Todos los derechos reservados
apartment